Shrink Wrap Machines Flexy Sealer 85A + S85
Request information »The semi-automatic L-sealers, Flexi Sealer series, are very functional machines with high quality and competitive price. The Flexy Sealers use a sealing system controlled electronically and advanced safety systems. Thank to the semiautomatic or automatic mode and the creation of customized working programs, these machines are easy to use and have a high production capacity. The Flexy Sealer 85A can be coupled with the shrinking tunnel S85. USE: The operator put the product on the working table into the shrink film, guides it inside the sealing area and pushes the start button. The motorized sealing bar goes down and the product is sealed. After sealing, the power bel conveyor moves the product to the shrinking tunnel and then the packed products outfeed.
Technical features Flexy Sealer 85A
Continuous cycle sealing
Pack deviation device
Film waste winding device as standard supply
PTFE-coated sealing blade
Closed-circuit liquid cooling of the sealing bars
Viewer of the coolant level
Working height of the sealer and of the tunnel
adjustable by means of an external crank
Mobile product-holding plate, loose from the film reel support
to allow a better adjustment of the film to the pack size
Emergency button
Automatic pack discharge by means of a motorized
conveyor
Flextron® control system equipped with:
Alphanumeric LCD control panel provided with a 16-bit
microprocessor card and solid state relays
Modular power section, separated from the control
panel and characterized by:
Longer-lasting solid state relays providing easier
maintenance
In case of failure, possibility of replacing just the
damaged module, without losing the data stored in the
memory
This system allows a simple and precise control of all the
machine operations, such as:
Machine status
Number of packs produced by an electronic
packcounter
Real-time production
Adjustment of the sealing temperature
Pack discharge speed
Automatic hood closing and re-opening, motorized and
managed by inverter
Delay in the opening of the sealing arm sealing arm
safety device
Possibility of scheduling up to 10 different work cycles,
thus resulting in increased productivity and simplified use
Troubleshooting
Reduced power consumption
Compliance with CE regulations
Machine made according to CE standards
Notes: Technical data subject to change without notice
The productivity depends on the type of Podotto
Features
Dati tecnici | |
---|---|
Alimentazione elettrica | 220 V - 1 ph - 50 Hz |
Potenza installata | 3100 W |
Dimensione barre | 870 x 620 mm |
Altezza max. prodotto | 300 mm |
Produzione max. | Fino a 900 pph |
Dimensione max. bobina | 800 - Ø 300 mm |
Dimensione macchina | L 3050 x W 1055 x H 1125 mm |
Peso netto macchina | 247 Kg |
Film utilizzabile | PVC, Poliolefina fino a 30 my |